SuperLift 4" Jeep Wrangler JK 2-Door Lift Kit (2007)

Product Description

As the JK is raised, track bar angle increases and when lift height exceeds 2" bar length becomes an issue. Bar bind causes the chassis and axle to continuously "tug" against each other resulting in uneven ride height (side-to-side), chassis / frame misalignment and "roll and yaw". Front correction is accomplished via a new adjustable track bar. This route is preferred, as opposed to using a relocation bracket, since the bar's arc-of-travel must remain in-sync with the drag link's arc-of-travel or steering wheel "kick" will result. A relocation bracket is used on the rear axle since there are no steering geometry issues.

The stock JK has no provisions for front caster angle realignment, which is required at this lift height, so Superlift provides new alignment cams. Compression travel is controlled via new Urethane stops while new shocks (3 different levels of performance and price offered) improve control and restore full extension travel. The lift system also includes longer sway bar links with factory style, greasable tie-rod type upper ends, front / rear brake hose relocation brackets and emergency brake cable brackets... nothing is left unattended.

Kit Includes:

• Front Springs
• Rear Springs
• Front Superlift Superide Shocks
• Rear Superlift Superide Shocks
• Adjustable Front Track Bar
• Rear Track Bar Bracket
• Front Cam Bolts
• Front Brake Hose Brackets
• Rear Brake Hose Brackets
• Extended Front Bump Stops
• Extended Rear Bump Stops
• Front Bump Stop Spacers
• Rear Bump Stop Spacers
• Anti-Sway Bar Links

Installation Instructions

Click here to view installation instructions.