SuperLift 4" Toyota 4Runner 4WD & 2WD Lift Kit (1990-95)

Product Description

In 1986 Toyota replaced the solid front axle / leaf spring design with independent front suspension supported by torsion bars. What makes its design somewhat unique is that the torsion bars run along the top of the frame rails.

Front lift is achieved by lowering the lower control arms via one-piece cross member assemblies. The upper control arms must remain in their factory location since they attach to the torsion bars which cannot be relocated. New precision cast knuckles bridge the increased distance between the upper and lower control arms. The front differential housing is lowered to keep CV axle angles in check. An optional front skid plate, available in mild steel or brushed stainless steel with our "flame" logo, protects the front differential and steering. Optional cross member-to-frame kicker braces, recommended for the hard-core off-roader, are also offered.

The 4-Runner sports rear coil springs with a four-link arrangement. 4-Runner rear lift is set at 4" and consists of new coils plus all brackets needed to properly reposition the entire 4-link system.

This kit includes:

• Drivers side knuckle adapter
• Passengers side knuckle adapter
• Lower control arm front leg cross member
• Lower control arm rear leg cross member
• Drivers side axle relocation bracket
• Passengers side front axle relocation bracket
• Passengers side rear axle relocation bracket
• Sway bar brackets
• Compression stop extensions
• Rear coil springs
• Drivers side upper link bracket
• Passengers side upper link bracket
• Drivers side lower link bracket
• Passengers side lower link bracket
• Track bar bracket
• Compression stop extensions
• Brake proportioning valve relocating bracket
• Drop link extension tubes
• Limiting straps
• Brake hose
• Superlift Superide shocks with boots

Wheels must be changed with lift to a wheel with no more than 3.75" of backspacing.